Nexai 3D filaments are engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality. The filaments are universally designed and compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.? Perfect for strength and flexibility, Nexai PETG, or Polyethylene Terephthalate Glycol-modified filament, is a great alternative to ABS or PLA filaments. PETG filaments can be processed over a wider processing range than conventional PET filaments and also offer a good combination of properties such as toughness, easy bed adhesion, and stiffness. The 3D printed object will have a glossy type finish with PETG. Why we love it: Hydrophobic Easy adhesion to a number of surfaces Environmentally safe No heating bed required.Product specifications:Brand: NexaiMaterial: PETGDiameter: 1.75mmTolerance: +/- 0.03mmPrint temperature: 230°C - 245°CPrint speed: 30-60mm/sBaseplate temperature: No heatBubble: 100% zero-bubbleLength: 1.75mm(1KG)=330MQuick start guide for wood materialThe first layer is the most important part of any print. There are a few things you need to do to get the first layer to stick well.1. You need the print bed (or print surface) to be level.2. You need the extruder to be homed to the correct height from the bed.3. You need a good base material for your wood filament to adhere to.How to store:1. Keep material in sealed bag until ready for use.2. Avoid Water. Keep in dry place.3. Keep away from heat.